How to make led display life longer, this article will give you the answer.
When you spend a lot of money on the LED display, but in 4 years, 5 years, there are various problems. Of course, it has something to do with the quality of the screen itself, but any screen can still work as long as it gets better protection.
Well, it turns out you can adjust the life of the existing LED screen through some simple maintenance. In fact, these adjustments can help you increase your lifespan by about 2-3 years or even longer.
Nowadays, a large LED advertising screen has been widely used in both indoor and outdoor application fields, and with the progress of technology, the display effect and stability of products have been further improved. However, in daily use, if you can pay attention to some problems, to avoid some misunderstandings, it will undoubtedly help to extend the service life of the product, further ensure the durability and reliability of the product in use.
Therefore, JDX will discuss 9 ways to make outdoor LED display longer in service:
This is what you do:
1. Be careful of the environmental humidity around the outdoor LED advertising screen, and do not let the moisture into the advertising screen. If the cold and humid outdoor LED advertising screen is plugged in, the internal parts of the LED screen will be eroded by water vapor, and the outdoor LED advertising board will be damaged irreparably.
2. All combustible materials and conductor metal are strictly prohibited to enter the led screen to avoid short circuits or even fire.
3. When cleaning the screen, it is necessary to clean it gently to reduce the probability of damage as much as possible.it can improve the display effect of an LED advertising screen.
4. The power supply of the screen is regulated to be stable, and the grounding protection should be done well. When the weather is not good, strong wind, heavy rain, and thunder, the screen should be turned off.
5. The inside of the screen shall be closed to avoid water and other conductive metal materials. Outdoor LED advertising screens should be placed in a natural environment with good ventilation and less smoke and dust. The dust of large particles will not only weaken the display effect but also cause harm to the power circuit of the LED advertising screen.
6. Correct power switch sequence of outdoor LED electronic advertising screen: A: first open the controller, then run the control software, after the operation is stable, turn on the LED advertising screen by the plug-in. B: Turn off the screen first, then the computer.
7. It is recommended that the led screen should rest for at least 2 hours every day. When not in use for a long time, light it at least once a month for more than 2 hours. Wet areas or plum rain season, at least once a week to use more than once.
8. Large Outdoor LED screen needs regular maintenance, check whether it can work normally, and repair in time if there is any line damage. The control computer is best placed in constant temperature and humidity, and relatively clean room, to ensure its ventilation and heat, and longtime stable operation.
9. When the LED screen is working, it is better not to keep it in the full color and high brightness picture for a long time, which will generate a large amount of current, the solenoid coil is very easy to burn, which will destroy the led chip and shorten the service life of the led screen.
With the spring and summer handover and the coming rainy season in succession across the country, it is best to carry out early maintenance of large outdoor LED screen in the recent period, and in later use, if you can abide by the above principles, it will be helpful for the use of the large screen.
